 |
| Dale's Rails |
| Portable Model Train Tables |
 |
| Products Page # 1 |
| "A Model Train Layout Where Ever You Go" |
| ==> Our Train Table is a modular design. The tables come as a series of sections, held together by brackets with hand knobs installed from under the table. ==> The setup is fast and easy and can be completed without using any tools. It should normally take no more than 20 minutes to set up your table ==> The table surface is wood, 1/2 inch thick and comes undecorated. The customer completes the painting and adds scenery. |
| Shown in the picture above is our Elite- 2, HO Scale Train Table as delivered (minus cars & controller). |
 |
| We offer two basic styles of Model Train Tables: ==>The Elite-2, is 48" wide by 61" long and has two sections. ==>The Elite-2, "Big Boy" is 48" wide by 96" long and has three sections. |
 |
| Shown in this picture is our Elite- 2, "Big Boy" HO Scale Train Table as delivered (minus cars & controller). |
| Common Features |
| "Big Boy" Features |
| In addition to the features above, the Big Boy also offers: ==> Switches to allow transfer from the inner to outer loop. ==> Another switch on the inner loop (shown at the left) allows the train to go to a siding. A bumper at the end is included. |
 |
| ==> Our tables come with folding legs that are permanently attached to the board. The height of the table can be adjusted from about 24" to about 40" from the floor. ==> The track is Atlas HO scale, nickle silver code 100 "Flex Track", soldered together at the joints, and attached to the board with standard track nails. There are two main lines, the outer loop is approximately 22" radius, and the inner loop is approximately 20 inch radius. ==> Wiring hook up is provided and soldered in place for both main lines. ==> Both tables come with or without legs, with or without track, or with or without track and legs. ==> Both tables can come with N-Scale track. ==> We do not install O-Gage, or S-Gage. |